Back

2019 John Deere 735D

MoreLess
Limited Time Offer!

Selling Price -$42,500.00
No Images Available

Selling Price -

$42,500.00

HD Certified Pre-Owned
  • This head is in good shape, Both side belts look good, center belt shows some wear but has some life left. Could use a finger or two in the center drum, also a few welds to the back of the floor metal, but serviceable. Reel bushings and fingers are in good shape. Knives and guards are mostly good. Shields and appearance are good.
  • 2019
  • John Deere
  • 735D
  • Base
  • General
  • Knife: 490 cycles/min (1,040 spm) | Pickup reel: 6-54 rpm | Draper belts: Side belts: variable up to 223 m/min (735 fpm) | Center belts: 212 m/min (695 fpm) | Feed drum: 195 rpm
  • Pickup reel Diameter: 1,067 mm (42 in.) | Feed drum Diameter: 406 mm (16 in.) | Feed drum fingers Diameter: Steel heavy-duty round 16 mm (0.625 in) (with breakaway notch and retainer) | Finger reach: 152 mm 6 in.
  • 10.8 m (35.5 ft)
  • Base Hydraulic, 9 degrees max.
  • Draper belts: Side belts 1,016 mm (40 in.) | Center belts: 1,397 mm (55 in.)
  • Clean: Cleats 25.4 mm (1 in.)
  • Reel; stroke: 330 mm (13 in.) | Total range 391.5 mm (15.4 in.) | Reel fore and aft; stroke: 359 mm (14.1 in.), Total range 620 mm (24.4 in.)
  • 11.6 m (37.9 ft)
  • Overall operating: 2.5 m (8.2 ft)
  • field position: 11.4 m (37.5 ft) | on wheel, less dividers: 2.7 m (8.9 ft)
  • hitch extended: 13.8 m (45.4 ft)
  • pickup reel aprox: Combine only 3,514 kg (7,746 lb) | SPW only 2,914 kg (6,423 lb) | with transport Combine only 3,690 kg (8,136 lb) | SPW only 3,091 kg (6,813 lb)
  • Knife drive: Dual knife base | Pickup reel Number of slats: 6 bat poly base | Fingers: Nylon | Height control: Hydraulic | Speed control: Hydraulic | Reel resume: Base | Reel reverse: Base | Draper belts Speed control: Hydraulic from cab | Center belt reverse: Base | Number of fingers: 18 | Auger finger platform: Dual chevron, retracting | Drum/auger reverse: Base | Center clean out door: Base | Header height sensing Type: Electro-hydraulic base | Header height sensing on the ground: Base | Header height sensing off the ground: base
  • Straight line knife drive system
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $42,500.00
  • Bucklin
  • Pre-Owned
  • 65185
  • 2019
  • John Deere
  • 735D
  • 1H00735DKK0805036
  • Available
  • Draper belts: Side belts 1,016 mm (40 in.) | Center belts: 1,397 mm (55 in.)
  • Clean: Cleats 25.4 mm (1 in.)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.